About Hackintosh 22 December 2009

Why would anyone do it? Well, reasons vary. Some do it to save a buck, (Apple hardware being notoriously more costly), some enjoy stickin’ it to The Man, while others do it just for sheer techie cred.

The easier part of embarking on such a task is probably the build-your-own PC part. PC parts and kits to build your own are available at several online stores and can be purchased on the cheap at eBay. Essentials required are a chassis (to house the

innards) an Intel motherboard, a hard drive, memory (RAM), a video adapter and a DVD drive. Once you have everything properly connected and seated, the PC should boot up into BIOS. In BIOS, you can set the DVD as the primary boot drive.

Next comes the trickier part, getting Mac OS X Leopard installed on the machine. A “patched” Leopard install DVD is needed. With the patched version one can install Leopard straight to a PC with the help of a text editor to run commands. Once the patch is installed, the OS can be installed from the DVD. The install will begin by loading the Disk Utility, which will let you format the disk so that Leopard can be loaded. After this disk format, the installation of the OS is just a series of clicks in a graphical interface. Once installed, there is a post install patch that has to be applied.

Adam Pash, a senior editor for Lifehacker, has step-by-step instructions for building a Hackintosh. Pash claims that if you can snap Legos together, you can do build a hotrod PC running Leopard for under $800. I looked at the Apple Store, and a similarly equipped iMac goes for $2200. That includes a 20-inch LCD monitor, which is not included in Pash’s configuration. So even if we generously add $400 for a spiffy flat-panel monitor, the Hackintosh comes in at about $1000 cheaper.

Is It Safe and Legal?

Sounds great, right? Well there are a couple of issues with Hackintosh machines, as evidenced by various message boards and tech forums. One issue is the debate about the motherboard. Some Hackintoshers claim they built their machines using standard Intel motherboards. Others swear by an ASUS board. There also seems to be a problem with drivers not loading or being recognized which means there is a chance that some peripherals will not work correctly.

The biggest issue is the ongoing debate of the legality of embarking on such a task. Apple’s End User License Agreement states that Apple software is to be run on Apple hardware. Although there is no record of the company seeking prosecution against Hackintosh builders, the ethics of building one is questionable. I doubt that Apple would send goons in dark glasses to your door for building one, but if you started a business of selling custom-built Hackintosh computers, all bets are off.

Building a Frankenstein-esque machine can always lead to potential problems and nightmares with troubleshooting. Whatever you do, don’t bring your Hackintosh to the Apple store and ask the guys at the Genius Bar for tech support. Have you built a Hackintosh, or do you have plans to do so? Post your comments below…

Membuat Wireless Ad Hoc Networks Dengan Windows 7 22 December 2009

Membuat Wireless Ad Hoc Networks Dengan Windows 7

Windows 7 telah datang dengan banyak fitur baru yang berada di bawah tenda. Salah satu fitur tersebut adalah dukungan asli untuk menciptakan Ad Hoc Wireless Networks. Sementara fungsi dibangun di windows7 tidak mengijinkan Anda untuk berbagi koneksi internet melalui jaringan Wireless Anda buat, pihak ketiga tool seperti yang sangat populer Connectify membuat tugas ini lebih mudah dan lebih aman.

Tapi satu hal yang saya tidak suka tentang Connectify adalah antarmuka. Hanya tidak berbaur dengan antarmuka windows7. Lihat pada gambar di bawah yang menunjukkan Connectify dalam tindakan:

connectify

Apa Connectify lakukan adalah membuat koneksi WiFi Virtual bahwa siapapun dapat melakukan koneksi ke, sama seperti itu adalah jalur akses. Hari ini saya datang di app lain yang disebut Virtual Router yang melakukan pekerjaan yang sama, namun meskipun dalam cara yang lebih intuitif.

Untuk memulai hanya menginstal app dan api itu. Masukkan nama untuk jaringan, sandi dan memilih sambungan yang Anda inginkan untuk berbagi dan tekan saja mulai Virtual Router. Dan beberapa saat kemudian Anda harus memiliki jaringan Wireless aktif Anda dapat berbagi.

Virtual Router adalah Windows 7 dan Windows Server 2008 saja, karena hanya mereka yang baru dibangun di Hosted Wireless Network (alias Virtual WiFi) teknologi. Menggunakan enkripsi WPA2 untuk menjamin keamanan dan enkripsi ini tidak dapat dimatikan.

Bagaimana Virtual WiFi berbeda dari Ad-Hoc? Ad-Hoc paling cocok jika anda menghubungkan dua komputer dan dapat digunakan untuk berbagi file, sedangkan perangkat seperti Connectify dan Virtual Router memungkinkan Anda untuk berbagi koneksi internet dengan jumlah komputer banyak.

3 Langkah Mudah MengInstall Mac OSX Leopard Di PC Biasa 22 December 2009

Update: 2: Jika Anda mencari panduan untuk Dual Boot Windows Vista dan Mac OSX Leopard, silakan mengikuti panduan ini Hack Attack : Dual Boot Leopard and Windows Vista. Dual Boot Guide adalah panduan komprehensif dan harus bekerja untuk sebagian besar dari Anda dengan sedikit kerja keras.

Update: 1: Ada versi yang lebih baru Hack ini bahwa Anda mungkin mau check out. Yang jauh lebih sederhana dan dapat dilakukan oleh hampir semua orang. Juga hack yang lebih baru Mac OSX 10.5.1 termasuk jadi silakan periksa Hack Attack : Install Leopard On your PC in Just One Step.

Mac OSX Leopard

Nah yang sudah hanya hari sejak Mac OSX Leopard dirilis secara resmi oleh Apple dan para hacker telah berhasil menciptakan sebuah DVD yang ditambal semua orang seperti Anda dan saya dapat digunakan untuk menginstal Leopard pada PC tanpa harus membeli Mac. Harap perhatikan tutorial yang akan saya posting masih eksperimental

dan hal-hal yang mungkin tidak bekerja dengan cara yang benar hanya karena masih dini hari di hacking Leopard untuk bekerja pada PC. Nah jika Anda tidak keberatan mendapatkan mengacaukan PC anda kemudian pergi ke depan dan mencoba tutorial ini.

Pastikan Anda membuat cadangan semua data penting sebelum melanjutkan. Berikut adalah hal-hal yang akan Anda perlukan sebelum Instal Leopard di PC Anda …

* The Patched DVD Image
* The file zip yang berisi patch
* Satu pena drive atau USB Flash Drive yang diformat sebagai FAT32

Nah setelah Anda memiliki semua ini, Anda dapat melanjutkan dan Install Leopard ..

Langkah 1. Mendapatkan-siap

* Burn DVD Image ke sebuah Single Layer DVD-R menggunakan perangkat lunak seperti Nero.
* Format USB Flash Drive dan dorongan label harus “Patcher” tanpa tanda kutip. Harap dicatat itu harus “Patcher” saja dan tidak ada hal lain untuk patch untuk bekerja ketika kita menerapkan itu nanti.
* Ekstrak file Zip dan memasukkan isinya ke dalam USB Flash Drive.
* Sekarang Drive USB harus mengandung suatu folder bernama “file”, jika tidak maka periksa untuk melihat di mana Anda telah pergi salah.

Langkah 2. Instalasi Leopard

* Sekarang bahwa Anda memiliki Patched DVD dengan Anda, kini Anda dapat menginstal Leopard. Pop di DVD ke dalam drive dan boot ke dalamnya dengan menekan F12 pada BIOS Prompt.
* Boot ke DVD dan installer seharusnya tampil. Ini memakan waktu cukup lama, jadi bersabarlah.
* Pilih Bahasa Anda dan pastikan Anda memilih Customize dan Anda perlu hapus pilihan semua paket yang ditampilkan.
* Leopard sekarang akan menginstal. Ini bisa berlangsung agak lama, jadi ambil sendiri kopi.
* Ini akan meminta Anda untuk Reboot, jadi lanjutkan dan Reboot. Sebelum reboot pastikan bahwa USB Flash Drive yang terhubung ke PC.

Langkah 3. Patching Leopard

* Sekarang bahwa Anda sudah mendapat Leopard terinstal, anda perlu patch itu. Sebelum kita melakukannya Boot ke DVD Leopard seperti cara Anda lakukan sebelumnya.
* Tunggu sampai Darwin Bootloader to load. Begitu banyak atas tekan F8. Sekarang Anda akan melihat sebuah prompt. Jenis-s dan tekan enter. DVD sekarang akan memuat dalam mode Verbose. Perhatikan kesalahan apapun. Seharusnya beban tanpa masalah karena Anda telah menginstall Leopard.
* Setelah di-load setup pilih Bahasa Anda. Setelah selesai Anda sekarang harus melihat Welcome Screen. Begitu ada arahkan ke Utilities-Terminal.
* Setelah beban terminal, anda sekarang perlu untuk browse ke Drive USB anda, maka ikutilah langkah-langkah di bawah ini, mengetik persis seperti yang tertera di bawah ini di Terminal. Pada command line ketik sebagai berikut mereka muncul di sini

cd ..
cd ..
cd Volumes
cd Patcher
cd file

Perhatikan ruang antara cd dan 2 titik.
* Now its waktu untuk menjalankan Patcher untuk memastikan Leopard akan bekerja pada PC Anda. Ketik berikut ke dalam Terminal. ./9a581PostPatch.sh
* The Patch sekarang harus dijalankan. Anda dapat menjawab Ya sambil mengeluarkan ACPUPowerManagement.kext
* Setelah Script selesai, anda sekarang harus mampu Boot ke Leopard setelah Anda me-restart.

Langkah 4. Selamat! Anda telah melakukan hal yang Mustahil!

Nah itu dia. Harap dicatat ini belum diuji secara luas, sehingga sebagian besar dari Hardware anda seperti Sound, Network mungkin tidak bekerja. Jika sesuatu yang tidak beres untuk Anda atau Anda ingin membantu kami, maka silahkan bergabung dengan diskusi ke arah OSX86Scene. Jika Anda melihat saya tidak pernah mengirim link ke Torrent DVD yang berisi gambar dan zip. Yah aku tidak pernah mengirim mereka karena saya yakin para pengacara atas di Apple akan menggugat neraka keluar dari saya. Jika Anda bertanya-tanya di mana Anda dapat menemukan mereka, kemudian kepala ke Demonoid dan mencarinya.

Nah di sini adalah beberapa screenshot oleh Mac.nub atas di forum Leopard yang bisa bekerja pada sistem.

LeopardLeopard

Beberapa Pembaharuan dan Klarifikasi:

* Hack ini bekerja pada PC Intel dengan atleast SSE3
* Anda harus memformat partisi Leopard Anda untuk HFS +
* Pastikan anda menginstal Leopard di MBR dan tidak GUID atau akan bisa boot.
* Lebih Patched DVD dari Uphuck, Netkas adalah dalam karya sehingga akan lebih baik jika Anda menunggu rilis dipoles untuk keluar.

Instal Windows 7 Menggunakan USB Drive (FlashDisk) 22 December 2009

Instal Windows 7 Menggunakan USB Drive (FlashDisk)

// `

Apakah Anda salah satu dari orang-orang yang memiliki Netbook atau komputer yang tanpa DVD Drive? Apakah Anda mencari yang sederhana, cara yang cepat untuk menginstal windows7 atau Sistem Operasi lainnya dari Microsoft di Netbook?

Tampaknya ada panduan seluruh internet, yang memungkinkan Anda untuk membuat Bootable Anda sendiri windows7 Instalasi pada Pen Drive. Meskipun tidak terlalu rumit, metode ini sudah cukup masuk akal untuk menakut-nakuti para pemula pergi.

Jadi, baca terus untuk mengetahui bagaimana Anda dapat menginstal windows7 pada komputer Anda menggunakan USB Pen Drive, tanpa semua rasa sakit yang membakar DVD’s etc …

Mari kita mulai saat itu, di sini adalah persyaratan sebelum kita lanjutkan:

* A windows7 ISO Image (Setiap Versi yang akan dilakukan)
* UltraISO (tidak gratis, tetapi versi trial cukup untuk panduan ini)
* A 4 + GB Pen Drive

Mari kita mulai lalu ..

1. Download dan Install UltraISO (Free Trial)
2. Plug in pena drive ke PC Anda, dan cadangan semua yang Anda butuhkan dari Pen Drive, karena semua data yang ada akan dihapus dari pena drive.
3. Mulai UltraISO, arahkan ke File-> Buka dan menemukan citra ISO dari Windows 7 dan membukanya.

4.Dalam tab lokal yang terletak di bagian kiri bawah, pilih Drive USB anda. (Double periksa untuk memastikan hal ini adalah drive yang Anda ingin membuat bootable)
5.Sekarang klik Bootable-> Write Disk Image dari Menu

6.Pada kotak dialog yang muncul, klik Write untuk menulis gambar ke pena USB drive. (Opsional anda juga dapat memeriksa Verifikasi, ini akan memeriksa data yang ditulis untuk setiap kesalahan)

7. Tunggu selama itu untuk menyelesaikan, dan selamat Anda baru saja membuat sebuah bootable windows7 Instalasi menggunakan USB Pen Drive.
8. Restart komputer Anda dan tekan F2/F9 saat boot up, untuk boot dari Pen Drive dan lanjutkan untuk menginstal windows7 seperti kamu akan melakukan sebaliknya menggunakan sebuah DVD.

[Bonus]

Mau solusi yang lebih mudah untuk menginstal windows7 menggunakan Pen Drive USB anda. Pergi ke depan dan mengambil salinan WinToFlash. Extract isi Zip WinToFlash.exe Arsip dan terbuka. Sekarang Anda akan melihat sebuah layar seperti yang ditunjukkan ..

Klik tombol “Huge” Windows Setup Transfer Wizard dan Anda seharusnya sekarang melihat sesuatu seperti ini. Masukkan rincian yang sesuai dan bang Anda dapat membuat bootable disk dalam waktu kurang dari dua langkah sederhana ini.

Ya, benar-benar yang sederhana untuk membuat Anda sendiri Instalasi windows7 Pen Drive! Drop komentar Anda dan beritahu kami jika Hack Attack ini bekerja untuk Anda

Share Internet over WiFi in Windows 7 22 December 2009

Hack Attack : Share Internet over WiFi in Windows 7

Hack Attack : Share

// Windows 7 has come with many new features that are under the hood. One such feature is the native support to create Wireless Ad Hoc Networks. While the built in functionality of Windows7 does not allow you to share your internet connection over the Wireless network you create, third party tools like the very popular Connectify make this task easier and more secure.

But the one thing that I didn’t like about Connectify is its interface. It just doesn’t blend with the interface of Windows7. Have a look at the screenshot below that shows Connectify in action :

What Connectify does is create a Virtual WiFi connection that anyone can connect to, just as it were a access point. Today I came across another app called Virtual Router that does the same job, but albeit in a much more intuitive way.

To start just install the app and fire it up. Enter the name for the network, a password and choose the connection you want to share and just hit start Virtual Router. And moments later you should have an active Wireless network you can share.

Virtual Router is Windows 7 and Windows Server 2008 only, because only they have the new built in Wireless Hosted Network(a.k.a Virtual WiFi) technology. It uses WPA2 Encryption for ensuring security and this encryption cannot be turned off.

How is Virtual WiFi different from Ad-Hoc? Ad-Hoc is best suitable if you are connecting two computers and can be used to share files, while tools such as Connectify and Virtual Router allow you to share the internet connection with multiple number of computers.

3 Easy Steps Install Mac OSX Leopard On Your Pc 22 December 2009

Update : 2 : If you are looking for a guide to Dual Boot Windows Vista and Mac OSX Leopard, please follow this guide Hack Attack : Dual Boot Leopard and Windows Vista. The Dual Boot Guide is a comprehensive guide and it should work for most of you with a little bit of hard work.

Update : 1 : There is a newer version of this Hack that you might want to check out. Its much more simpler and can be done by almost everyone. The newer hack also includes Mac OSX 10.5.1 so please check out Hack Attack : Install Leopard On your PC in Just One Step.

Well its been only a day since the Mac OSX Leopard was released officially by Apple and the hackers have managed to create a patched DVD that everyone like you and me can use to install Leopard on PC’s without having to buy a Mac. Please note the tutorial that I am going to post is still experimental and things might not work the right way simply because it is still early days in hacking Leopard to work on PC’s. Well if you don’t mind your PC getting screwed then go ahead and try out this tutorial.

Make sure you backup all important data before you proceed. Here are the things that you will need before Install Leopard on your PC…

• The Patched DVD Image
• The zip file containing the patch
• One pen drive or USB Flash Drive formatted as FAT32

Well once you have all these you can go ahead and Install Leopard..

Step 1. Getting things ready

• Burn the DVD Image onto a Single Layer DVD-R using a software like Nero.
• Format the USB Flash Drive and the drive label should be “Patcher” without the quotes. Please note it has to be “Patcher” only and nothing else for the patch to work when we apply it later.
• Extract the Zip file and put its contents into the USB Flash Drive.
• Now your USB Drive should contain a folder called “files”, if it doesn’t then check to see where you have gone wrong.

Step 2. Installing Leopard

• Now that you have the Patched DVD with you, you can now install Leopard. Pop in the DVD into the drive and boot into it by pressing F12 at the BIOS Prompt.
• Boot into the DVD and the installer should now load. It take a while though, so be patient.
• Select your Language and make sure you select Customize and you need to deselect all the packages that are displayed.
• Leopard will now install. This can take a while, so go grab yourself a coffee.
• It will ask you to Reboot, so go ahead and Reboot. Before rebooting make sure that USB Flash Drive is connected to the PC.

Step 3. Patching Leopard

• Now that you have got Leopard installed, you need to patch it. Before we do that Boot into the Leopard DVD like the way you did before.
• Wait for the Darwin Bootloader to load. Once it loads up press F8. You should now see a prompt. Type -s and hit enter. The DVD will now load in Verbose mode. Watch for any errors. It should load without a problem because you have already installed Leopard.
• Once the setup is loaded select your Language. Once done you should now be seeing the Welcome Screen. Once there navigate to Utilities-Terminal.
• Once the terminal loads up, you now need to browse to your USB Drive, so follow the steps below, typing it exactly as it appears below in the Terminal. In the command line type the following as they appear here

  cd ..
  cd ..
  cd Volumes
  cd Patcher
  cd files

  Notice the space between cd and the 2 dots.

• Now its the time to run the patcher to make sure Leopard will work on your PC. Type the following into the Terminal. ./9a581PostPatch.sh
• The Patch should now run. You can answer Yes while removing the ACPUPowerManagement.kext
• After the Script is done, you should now be able to Boot into Leopard after you restart.

Step 4. Congratulations! You’ve done the Impossible!

Well that was it. Please note this has not been extensively tested, so most of your Hardware like Sound, Network may not work. If something goes wrong for you or you want to help us, then please join the discussion over at OSX86Scene. If you noticed I haven’t posted the links to the Torrent that contains the DVD image and the zip. Well I haven’t posted them because I am sure the lawyers over at Apple are going to sue the hell out of me. If you wondering where you can find them, then head over to Demonoid and search for it.

Well here are few screenshots by Mac.nub over at the forums who could get Leopard working on his system.

Some Updates and Clarifications :

• This Hack works on Intel PC’s with atleast SSE3
• You need to format your Leopard Partition to HFS+
• Make Sure you install Leopard on MBR and not GUID or it won’t boot.
• More Patched DVD’s from Uphuck, Netkas is in the works so it would be better if you wait for the polished releases to come out.

Install Windows 7 From a USB Drive 22 December 2009

You are here: Home » Microsoft » Hack Attack : Install Windows7 From a USB Drive

Hack Attack : Install Windows7 From a USB Drive

// Are you one of those people who own a Netbook or a computer that’s without a DVD Drive? Are you looking for a simple, fast way to install Windows7 or any other Operating System from Microsoft on your Netbook?

There seem to be guides all over the internet, that allow you to create your own Bootable Windows7 Installation on a Pen Drive. Whilst not overly complicated, these methods have enough of nonsense to scare the beginners away.

So read on to find out how you can install Windows7 on your computer using a USB Pen Drive, without all the pain of burning DVD’s etc…

Lets get started then, here are the requirements before we proceed :

• A Windows7 ISO Image (Any Version will do)
• UltraISO (It isn’t free, but the trial version is sufficient for this guide)
• A 4+ GB Pen Drive

Let’s begin then..

1. Download and Install UltraISO (Free Trial)
2. Plug in the pen drive into your PC, and backup everything that you need from the Pen Drive, because all the existing data will be wiped off the pen drive.
3. Start UltraISO, navigate to File->Open and locate the ISO image of Windows 7 and open it.
4. In the local tab located at the bottom left, select your USB Drive. (Double check to make sure this is the drive you want to make bootable)
5. Now click Bootable->Write Disk Image from the Menu
6. In the dialog box that appears, click Write to write the image onto the USB pen drive. (Optionally you can also check Verify, this will check the data written for any errors)
7. Wait it for it to complete, and congratulations you’ve just created a bootable Windows7 Installation using USB Pen Drive.
8. Restart your computer and press F2/F9 while booting up, to boot from the Pen Drive and proceed to install Windows7 just like you’d do otherwise using a DVD.

[Bonus]

Want an even easier solution to install Windows7 using your USB Pen Drive. Go ahead and grab a copy of WinToFlash. Extract the contents of the Zip Archive and open WinToFlash.exe. You should now see a screen as shown..

Click the “Huge” Windows Setup Transfer Wizard and you should now see something like this. Enter the appropriate details and bang you can create the bootable disk in less than a couple of simple steps.

Yes it really was that simple to create your own Windows7 Installation Pen Drive! Drop in your comments and let us know if this Hack Attack worked for you

MemBoBol (ByPass) Proxy Server Dengan Ultra Surf 20 December 2009

MemBoBol (ByPass) Proxy Server Dengan Ultra Surf

Pembatasan proxy pada suatu jaringan memang sering dijumpai. Tidak sedikit pula di unit kampus dan instansi sering mengalami gangguan koneksi saat kita browsing-browsing. Hal ini dapat kita atasi dengan meng-hack proxy yang ada di jaringan yang kita pakai. Salah satu software yang dapat menembus proxy adalah Ultrasurf. Ultrasurf ini dibuat oleh UltraReach Internet Corp.

Prinsip kerja dari hack proxy ini adalah menggunakan proxy orang lain dalam hal ini ultrasurf. Langkah-langkah sebagai berikut :

Step 3 : Enjoy surfing, just go to internet explorer and surf the net

1. Pastikan komputer anda terinstall program Ultrasurf versi apapun. Jika belum ada maka silahkan download pada link berikut :
Download this torrent UltraSurf 9.4

Link Download Yang Lain :

SL	Ultrasurf Versions	Size
1	US9.6.zip (latest)	390K
2	US9.5.zip (Recommended)	419K
3	US9.4.zip	382K
4	US9.3.zip	387K
5	US9.2.zip	385K
6	US9.0.zip	192K
7	US8.9.zip	201K
8	US8.6.zip	98K
9	US8.4.zip	85K

2. Jalankan aplikasi ultrasurf

3. Anda hanya perlu mengubah setting dari ultrasurf untuk penggunaan proxy ultrasurf dengan cara klik option-proxy setting dan pilih proxy : directly use ultrasurf.

5. Contreng Don’t Use IE jika anda tidak ingin menggunakan browser IE. Jika tidak maka saat anda membuka ultrasurf maka secara otomatis IE akan running.

6. Contreng “Hide Golden Lock” jika anda tidak ingin mengeluarkan gambar gembok di pojok kanan bawah komputer anda

7. Jika terdapat informasi box bahwa “Succesfully Connected To Server” maka ultrasurf sudah dapat anda gunakan dengan baik.

8. Jika terdapat informasi “Cannot conect” atau “Please Check your connection” maka ultrasurf tidak dapat anda pakai.

9. Setelah ultrasurf dalam keadaan succes maka lakukan setting terhadap connection pada browser anda dengan klik tool – options

10. Klik Network-Setting

11. Isikan HTTP proxy configuration 127.0.0.1 Port 9666. Contreng Use this proxy for all protocols. Isikan pada No Proxy For : localhost, 127.0.0.1

12. Klik Ok dan Anda dapat melakukan internet tanpa gangguan apapun.

13. Selamat Mencoba

Use Ultrasurf Proxy Software To Unblock Any Blocked Website 20 December 2009

Use Ultrasurf Proxy Software To Unblock Any Blocked Website

Restrictions on a network proxy is frequently encountered. Not a few also in the campus units and agencies often have connection problems when we are browsing browsing. This can be overcome with a proxy to hack on the network we use. One of the software that can penetrate Ultrasurf Proxy. Ultrasurf is created by the Internet Corp. UltraReach.

Hack working principle of this proxy is a proxy of others in this ultrasurf. The steps are as follows:
Download this torrent UltraSurf 9.4

1. Make sure your computer installed any version of Ultrasurf program. If no then please download the following link:

2. Run the application ultrasurf

3. You only need to change the settings of the proxy ultrasurf for use by clicking ultrasurf-proxy option and select the proxy settings: directly use ultrasurf.

5. Contreng Do not Use IE if you do not want to use the IE browser. If not then when you open it automatically ultrasurf be running IE.

6. Contreng “Hide the Golden Lock” if you do not want to remove the padlock image in the bottom right corner of your computer

7. If there is information box that the “Connected To Server Succesfully” ultrasurf then be able to use it well.

8. If there is information “Can not CONECT” or “Please Check your connection” then you can not ultrasurf use.

9. Once in a succes ultrasurf then do the connection settings in your browser click tool – options

10. Click the Network-Settings

11. Fill in the HTTP proxy 127.0.0.1 port 9666 configuration. Contreng Use this proxy for all protocols. Fill in the No Proxy For: localhost, 127.0.0.1

12. Click Ok and you can make the Internet without any interference.

13. Good Try

Here is the most secure

way to unlock any kind of filters n’ firewalls, it is a kind of breakthrough in right for 100% information for people of countries like china where government has spent millions of dollars for raising cyber walls so that their people get filtered information.

Why Ultrasurf is world’s best proxy Surfing technology

or technique??

Lets find it and compare it

Compare ultra surf with other proxy software

So what exactly it is??

It is the flagship software product from UltraReach Internet Corp. for Internet anti-censorship. It enables users inside countries with heavy Internet censorship to visit any public web sites in the world safely and freely. it enables users to browse any website freely just the same as using the regular IE browser while it automatically searches the highest speed proxy servers in the background.

Learn More

What does it means??

• 100% freedom to have 100% information in most secure way.
• It means no matter where you are you can access 100% free version of internet I mean no firewalls no restriction nothing….
• Almost all schools, universities and corporate offices raise firewalls to filter out not work related sites, now those firewalls will be of no use or they have to change their plans.
• Everybody can access various social networks like Orkut, Youtube, Myspace, Hi5, Facebook, Linkedin etc. which are blocked almost in 99% schools and offices.
• 100% real time and it’s encryption is better then any online banking system.

Facts of UltraSurf:

• Service provided for 6 years
• Millions of users
• Users from over 150 countries
• Daily hits over 300 million
• Daily traffic over 5,000 GB

How to get going??

It’s very simple you have to just-

• Download an exe file
• Then extract it
• And run
• Set proxy if u have any (generally in offices internet are provided through proxies, you can find that, through tools>>internet options>>Connections>>LAN Settings>> there you are with proxy server for your LAN and it’s port
• Just copy that to proxy settings of UltraSurf.
• Then a window will pop up, says some thing in Chinese, just close this window
• And open fresh internet explorer
• There you are, you can surf any information.
• For office people: beware don’t spread words to your colleagues keep this info as limited as you can, coz if system people got to know about it then they’ll take your comp for scrutinizing.

Ultra Surf Preview

What is the Flip Side??

I should start with a quote that I’ve learn’t in my life

“Too much freedom can Make you or it can Break you”

The flip side is that you can access to anything, I thing you got my point, In school, universities and Work office various sites are blocked to raise their efficiency and productivity, and it is very much likely that if anyone get freedom he/she will definitely try to miss use it.

Some Useful Tips:

I’ve heard one thing many times that Ultra Surf is slowing down net speed or Ultra Surf is not working or something like that but after so many experience of Q&A and personal experience I’ve found that it’s not the Ultra Surf but it’s the net connection that has problems…..

• Check your net connection remember that it needs certain level of net speed to run Ultra Surf smoothly.
• check proxy settings of Ultra Surf, when u download fresh version u need to tweak proxy settings of Ultra Surf. do that manually, also sometimes proxy setting of Ultra Surf get vanished automatically.. do check for proxy setting and feed it manually. For any kind of browser Proxy IP address
  

  is 127.0.0.1 with port :9666 and For Ultra Surf it depends upon your network.

• 8.8 is the latest one and it is the best because when there is no net connectivity it automatically flashes a message…. it won’t hang u there for retry
• also last tip is that when net slows down or ain’t working at all, just exit Ultra Surf and re start it. instead of retry.. try exit and re start it…trust me retry is bad idea. just restart the whole thing.

• If you are using browser other than IE, then you have to manually change your proxy IP address to 127.0.0.1 with port :9666 of Firefox browser.
• Mac Users, change your proxy IP address to 127.0.0.1 with port :9666 of Safari browser.

Transform The Look Of Your Windows XP To The Look Of Mac OS X 18 December 2009

If you are getting bored with the look of your windows xp, and you want to try something new, like the look of Mac OsX from apple. Now you are in the right place to get all you want lol….!!! Have a sit and read carefully how to make the look of your ordinary windows xp become the look of Mac OSX from Aplle….

This sort explanation about what FlyakiteOSX is.

FlyakiteOSX is a transformation pack. It will transform the look of an ordinary Windows XP+ system to resemble the look of Mac OS X. The installer simply automates the process of replacing critical system files, setting registry tweaks, and installing extras such as cursors, sounds, visual styles, etc. FlyakiteOSX DOES NOT contain any spyware or ad-ware of any kind. All files needed for FlyakiteOSX are stored in the Windows directory in a folder named ‘FlyakiteOSX’ that is hidden by default. All registry values for FlyakiteOSX are written to HKEY_LOCAL_MACHINE\Software\FlyakiteOSX.

First you’ll need to download FlyakiteOSX (Click on the Normal Edition link). Once the zip file has finished downloading, extract the contents and begin the installation by double-clicking on the executable. When the Setup Wizard appears, click the Next button. The next step is to choose what components you wish to install, it also provides the option to create a System Restore Point. To take full advantage of the transformation pack, check all of the checkboxes to get all of the eye candy goodness that these components provide. After you have selected the components, click the Install button.

Once the installation has completed, click the next button. You will be prompted to reboot your system. Make sure you have no other applications open, then click the finish button. Your computer will go through the reboot process.

When mine came back up, I was greeted with this (kind of odd seeing Mac OS X right under “Welcome to Windows”):

After I logged in I noticed that my desktop had gone from this:

to this:

A rather significant change! Here’s some other screenshots:

You can do some further customization by altering the settings and options of the 3rd party applications. By right-clicking the icons for WinRoll and Y’z Shadow (in the notification area next to your clock), you can access their preference and options windows.

You can also right-click on the Dock bar to change it’s options as well.

If you ever decide that you no longer wish to look Macish, simply uninstall the transformation pack and you’ll be back to the XP look in no time.

Other download link to get Flyakite v 3.5 :

You can download FlyakiteOSX v 3.5 the latest version to transform your Windows XP to Be Mac OSXhere : DOWNLOAD THIS TORRENT (MAGNET LINK) Or DOWNLOAD THIS TORRENT (MAGNET LINK)

Install it and wait a second you’ll get Mac Osx on your PC…………

Have a nice try……